Bar & Beverage Equipment
Bar & Beverage Equipment: Underbar, Back-Bar & Draft Prices (2026)
In 2026, a new underbar ice bin typically costs $400–$1,800, a two-door back-bar cooler $1,800–$4,500, an undercounter bar glass washer $2,500–$8,000 and a direct-draw draft beer cooler $1,500–$4,500, before freight and tax. A complete bar package for a small to mid-size bar commonly lands between $10,000 and $40,000 in equipment, depending on length and draft system.
A working bar is a line of modular stations: ice bins with speed rails, blender and cocktail stations, glass washing and dump sinks under the bar top, refrigeration and draft behind it. Planning the stations around how bartenders actually move, and matching heights and depths across manufacturers, matters more than any single piece of equipment.
On this page
Bar & Beverage Equipment: types and specs
Add what you need to your quote list. Your specialist confirms exact models, utilities and lead times before quoting. Everything ships direct to you from the manufacturer or its distribution warehouse.
Ice bins
Insulated stainless bins that hold ice at the bar well, sometimes with a cold plate to chill soda-gun lines.
- Widths commonly about 24–48 in.
- Optional cold plate for beverage lines
- Slide or hinged covers
- Drain connection required
Beverage dispensers (cold drink / ice-beverage)
Countertop fountain units that dispense ice and soft drinks, and bowl dispensers for juices and tea.
- Ice-beverage units sized by ice storage and valve count
- Need water, drain and carbonation or bag-in-box supply
- Bowl dispensers typically 1–3 bowls
- Confirm syrup supplier compatibility before ordering
Underbar equipment (ice chests, speed rails, blender stations)
Modular stainless components under the bar top: ice chests, sinks, dump sinks, speed rails, blender stations and bottle storage.
- Depths commonly about 18–21 in. to fit under the bar top
- Stations bolt together; match manufacturer and height
- Speed rails about 22–48 in., single or double
- Blender stations need power and a rinse or dump sink
Back-bar coolers
Low-profile refrigerators behind the bar for bottles, mixers and wine, with solid or glass doors.
- Heights commonly about 33–40 in.; widths about 48–96 in.
- Solid, glass or sliding doors
- Black vinyl or stainless exterior
- Some models are ENERGY STAR certified; check energystar.gov
Glass washers
Undercounter glasswashing machines that clean and sanitize bar glassware in short cycles.
- High-temperature or chemical-sanitizing models
- Undercounter rack size commonly 20×20 in.
- NSF/ANSI 3 is the commercial warewashing standard
- High-temp models may need 208–230V power
Draft beer systems
Direct-draw keg coolers with towers, or long-draw systems that use glycol-chilled lines from a walk-in to remote towers.
- Direct draw suits taps close to the kegs
- Long draw needs a glycol power pack and insulated trunk line
- Many breweries recommend about 38°F serving temperature; check the Brewers Association guidance
- Line cleaning on a regular schedule protects beer quality
Bar & Beverage Equipment prices by type (2026)
| Type | Best for | Typical price (new) |
|---|---|---|
| Underbar ice bin / ice chest (24–48 in.) | Every bar well | $400–$1,800 |
| Cocktail station (ice bin, rails, sinks) | High-volume cocktail wells | $1,500–$5,000 |
| Speed rail (single or double) | Well bottles at each station | $40–$250 |
| Blender station | Frozen drinks and smoothies | $500–$1,800 |
| Back-bar cooler, 2-door | Bottled beer, mixers, wine | $1,800–$4,500 |
| Back-bar cooler, 3-door | Larger bars | $2,500–$6,000 |
| Bar glass washer (undercounter) | Glassware turnover at the bar | $2,500–$8,000 |
| Direct-draw draft beer cooler (1–4 kegs) | Bars with taps close to kegs | $1,500–$4,500 |
| Long-draw (glycol) draft system | Walk-in keg storage far from taps | Quote-based; varies with line count and run length |
| Ice-beverage dispenser (countertop) | QSR, self-serve soft drinks | $3,500–$9,000 |
| Cold drink (bowl) dispenser | Juices, iced tea, lemonade | $600–$2,500 |
How to size bar & beverage equipment
- Plan one ice bin with a speed rail per bartender well, plus a dump sink and hand sink within reach.
- Underbar is usually about 18–21 in. deep; confirm your bar top overhang and footrest before ordering.
- Size back-bar refrigeration to your bottle and can count: count cases on hand between deliveries and leave room for growth.
- For draft, count taps and keg sizes first; if kegs will live in a walk-in far from the bar, plan a long-draw glycol system.
- Every bar needs at least one conveniently located hand sink (Food Code 5-204.11); confirm placement with your health department.
What drives the price
- Bar length and number of stations
- Stainless grade and gauge of underbar
- Back-bar door count and glass vs. solid doors
- Draft: direct draw vs. long-draw glycol, tap count and run length
- Glass washer type (high-temp vs. chemical)
- Ice-beverage dispenser valve count and ice capacity
Energy savings: ENERGY STAR certifies some commercial refrigerators, including certain back-bar and glass-door models, and commercial ice makers that feed bar ice bins. Check energystar.gov for current certified models and local utility rebates. ENERGY STAR commercial food service equipment.
Before you buy: checklist
- Match underbar heights and depths across components; mixing manufacturers can leave gaps.
- Plan floor drains and indirect waste for ice bins, sinks and glass washers with your plumber.
- Ice used to chill bottles or cans cannot be served in drinks (Food Code 3-303.11); keep separate ice for service.
- Confirm the glass washer sanitizing method is acceptable to your local health department.
- Back-bar coolers need ventilation clearance; check the spec sheet for front-breathing models if enclosed.
- Confirm all bar sink and handwashing requirements with your local health department, which adopts and may amend the Food Code.
Bar & Beverage Equipment brands we quote
True
One of the most widely specified U.S. commercial refrigeration brands, known for reach-ins, prep tables, undercounters and glass-door merchandisers built for heavy daily use.
Beverage-Air
Broad commercial refrigeration line covering reach-ins, prep tables, bar refrigeration and back-bar coolers.
Krowne
Bar and plumbing brand offering underbar equipment, hand sinks and commercial faucets.
Perlick
U.S. bar equipment brand known for draft beer systems, underbar equipment and back-bar refrigeration.
Glastender
U.S. bar equipment manufacturer of underbar stations, back-bar refrigeration, glass washers and draft systems.
Lancer
Beverage dispensing brand making fountain soft-drink and ice-beverage dispensers and juice dispensers.
Micro Matic
Draft beer equipment brand supplying keg couplers, faucets, towers and direct-draw dispensers.
Don't see your brand? We quote most major foodservice manufacturers. Name the brand and model in your quote request.
Get bar & beverage equipment quotes
Send us your specs, or just your menu and space, and we'll recommend the right models across brands with a written, freight-included quote.
Frequently asked questions
How much does bar equipment cost?
A complete equipment package for a small to mid-size bar commonly costs $10,000–$40,000 in 2026, before freight, installation and tax. Underbar ice bins run $400–$1,800, back-bar coolers $1,800–$6,000 and glass washers $2,500–$8,000.
What is the difference between direct-draw and long-draw draft systems?
A direct-draw system keeps kegs in a refrigerated cabinet directly under the taps, while a long-draw system stores kegs in a walk-in and pumps beer through glycol-chilled lines to remote towers. Direct draw is cheaper and simpler; long draw supports more taps and keeps kegs out of the bar.
How much does a back-bar cooler cost?
A new two-door back-bar cooler typically costs $1,800–$4,500 and a three-door model $2,500–$6,000 in 2026, depending on door type, finish and brand.
Do bars need a glass washer?
Not always. Bars can wash glassware in a three-compartment underbar sink or send it to the main dishmachine, but a dedicated glass washer speeds turnover. Confirm your warewashing setup with your local health department.
Does a bar need a separate hand sink?
Yes. The FDA Food Code requires handwashing sinks to be conveniently located and used only for handwashing (sections 5-204.11 and 5-205.11), and that applies to bar areas. Your local health department sets the final placement rules.
Can ice used to chill bottles go into drinks?
No. Under the FDA Food Code, ice used to cool the outside of bottles, cans or other food may not then be used as food (section 3-303.11), so keep a separate ice bin for drinks.
Related guides
- Commercial ice machines
- Commercial refrigeration
- Commercial sinks
- Commercial dishwashers
- Restaurant equipment packages
- Request a quote
Sources
- FDA Food Code 2022
- NSF: food equipment and warewashing certification
- ENERGY STAR commercial food service equipment
- Brewers Association
Need help selecting equipment for your kitchen? Request a personalized equipment quote or call (732) 479-6550.