Commercial Shelving & Storage
Commercial Shelving: Wire, Polymer & Stainless Prices (2026)
A new four-shelf commercial shelving unit around 24×48×74 in. typically costs $150–$350 in chrome wire, $200–$500 in epoxy-coated wire, $350–$1,000 in polymer and $500–$1,500 in stainless wire in 2026, before freight and tax. Material is the biggest price driver, followed by shelf size and whether the unit is mobile.
Shelving decides how much of your walk-in and dry storage you can actually use. The main choice is material: chrome wire for dry storage, epoxy-coated wire or polymer for walk-ins and other damp areas, and stainless for the wettest or most corrosive spaces. The FDA Food Code requires food to be stored at least 6 inches above the floor (3-305.11), which is why every storage area needs shelving or dunnage racks rather than cases on the floor.
On this page
Commercial Shelving & Storage: types and specs
Add what you need to your quote list. Your specialist confirms exact models, utilities and lead times before quoting. Everything ships direct to you from the manufacturer or its distribution warehouse.
Wire shelving (chrome, epoxy-coated, stainless)
Open-wire shelves on posts that allow airflow and visibility. Chrome suits dry storage; epoxy coating and stainless resist moisture in walk-ins.
- Shelf depths 14, 18, 21 and 24 in.; widths about 24–72 in.
- Post heights commonly 54, 63, 74 and 86 in.
- Adjustable in about 1 in. increments on most systems
- Per-shelf ratings typically range from roughly 300 to 800 lb evenly distributed on stationary units; check the manufacturer's rating
Stainless solid shelving
Solid stainless shelves that contain drips and wipe clean, for wet areas or where spills must not reach lower shelves.
- Type 304 or 430 stainless; 304 resists corrosion better
- Common depths 18–24 in.; widths 36–72 in.
- Flat or louvered shelves
- Heavier and more expensive than wire
Polymer shelving
Plastic shelf mats on composite or coated posts. Rust-free, with removable mats that can be washed or run through a dishmachine.
- Common depths 18–24 in.; widths 36–72 in.
- Removable, washable shelf mats
- Suited to walk-in coolers and freezers
- Some lines include antimicrobial additives; check the spec sheet
Dunnage racks
Low platforms for heavy sacks, cases and kegs, keeping them off the floor.
- Heights usually about 8–12 in.
- Aluminum, stainless or polymer
- Solid or slotted tops
- Ratings vary widely by size; check the spec sheet
Food storage racks
Mobile or stationary racks for sheet pans, hotel pans and food storage boxes.
- Full-size racks take 18×26 in. sheet pans
- Universal racks also hold 12×20 in. hotel pans
- Aluminum or stainless; welded or knock-down
- End-load or side-load
Commercial carts
Utility, bussing and transport carts for moving product and dishware.
- Polymer, stainless or aluminum
- Two- and three-shelf models are common
- Caster size and type set load capacity
- Look for non-marking casters with brakes
Commercial Shelving & Storage prices by type (2026)
| Type | Best for | Typical price (new) |
|---|---|---|
| Chrome wire shelving, 4-shelf unit | Dry storage | $150–$350 |
| Epoxy-coated wire shelving, 4-shelf unit | Walk-in coolers, humid areas | $200–$500 |
| Stainless wire shelving, 4-shelf unit | Wet, corrosive or high-sanitation areas | $500–$1,500 |
| Polymer shelving, 4-shelf unit | Walk-ins and freezers; rust-free | $350–$1,000 |
| Solid stainless shelving, 4-shelf unit | Spill containment, heavy cleaning | $600–$2,000 |
| Dunnage rack | Heavy sacks and cases off the floor | $60–$300 |
| Mobile food storage / pan rack | Moving product between storage and prep | $150–$600 |
| Commercial cart (utility or bussing) | Transport and bussing | $100–$500 |
How to size commercial shelving & storage
- In walk-ins, plan shelving along the walls with an aisle of roughly 30–36 in.; usable shelving often covers about 50–60% of the floor.
- Use 18 in. or 24 in. deep shelves for cases; 14 in. shelves suit narrow dry storage and bottles.
- Per-shelf weight ratings typically range from roughly 300 to 800 lb evenly distributed on stationary units, depending on material and size. Check the manufacturer's rating for the exact shelf.
- Capacity drops on casters: a mobile unit is limited by its caster ratings, often well below the stationary rating.
- Keep the bottom shelf at least 6 in. off the floor to meet the Food Code (3-305.11) and allow floor cleaning.
What drives the price
- Material (chrome, epoxy, stainless wire, polymer, solid stainless)
- Shelf depth and width
- Post height and number of shelves
- Stationary vs. mobile (casters add cost and reduce capacity)
- Accessories: shelf dividers, ledges, labels, S-hooks
- Freight: shelving ships knocked down, usually by parcel or LTL
Before you buy: checklist
- Do not use chrome wire in walk-ins or humid areas; it rusts. Choose epoxy-coated, stainless or polymer.
- Confirm the per-shelf rating and the total unit rating, especially for mobile units.
- Look for NSF certification on shelving used in food storage.
- Measure ceiling height, sprinkler clearance and door swing before choosing post height; confirm sprinkler clearances with your fire marshal.
- Store food at least 6 in. above the floor (Food Code 3-305.11), and keep chemicals separate from and below food.
- Confirm storage rules with your local health department, which adopts and may amend the Food Code.
Commercial Shelving & Storage brands we quote
Eagle Group
U.S. manufacturer of stainless steel work tables, sinks, shelving, bun pan racks and other fabricated foodservice equipment.
Advance Tamco
Manufacturer of stainless steel work tables, equipment stands, sinks and shelving for commercial kitchens.
Metro (InterMetro)
Storage and transport brand best known for commercial wire shelving, polymer shelving, carts and food storage racks.
Cambro
Foodservice brand known for polymer shelving, food storage containers, carts and insulated food carriers.
Don't see your brand? We quote most major foodservice manufacturers. Name the brand and model in your quote request.
Get commercial shelving & storage quotes
Send us your specs, or just your menu and space, and we'll recommend the right models across brands with a written, freight-included quote.
Frequently asked questions
How much does commercial shelving cost?
A new four-shelf commercial unit around 24×48×74 in. typically costs $150–$350 in chrome wire, $200–$500 in epoxy-coated wire, $350–$1,000 in polymer and $500–$1,500 in stainless wire in 2026, before freight and tax.
What shelving is best for a walk-in cooler?
Epoxy-coated wire, polymer or stainless shelving is best for walk-in coolers and freezers because they resist moisture. Chrome wire is meant for dry storage and rusts in humid conditions.
How much weight can a wire shelf hold?
Per-shelf ratings on commercial wire shelving typically range from roughly 300 to 800 lb evenly distributed on a stationary unit, depending on size and construction. Always check the manufacturer's rating, and expect lower capacity on casters.
How high off the floor does food have to be stored?
The FDA Food Code requires food to be stored at least 6 inches (15 cm) above the floor (section 3-305.11). Your local health department may adopt this with amendments, so confirm locally.
Is polymer shelving better than wire shelving?
Polymer shelving costs more than chrome or epoxy wire but will not rust and has removable mats that are easy to wash. It is a strong choice for walk-ins and freezers; chrome wire remains the low-cost option for dry storage.
Related guides
- Walk-in coolers and freezers
- Stainless steel work tables
- Commercial refrigeration
- Restaurant equipment list
- Request a quote
Sources
Need help selecting equipment for your kitchen? Request a personalized equipment quote or call (732) 479-6550.