Stainless Steel Work Tables & Equipment
Stainless Steel Work Tables: Gauges, Sizes & Prices (2026)
A new stainless steel work table typically costs $150–$450 for a 24×48 in. 18-gauge 430 model, $350–$900 for a 30×72 in. 16-gauge 304 model, and $600–$1,800 for heavy 14-gauge 304 tables or tables with an enclosed cabinet base in 2026. Gauge (thickness), steel grade (304 vs. 430) and size drive most of the price difference.
Stainless work tables, stands and racks are the backbone of every prep area, and they are where most buyers either overspend or buy too light. Two specs matter most. Gauge is thickness: a lower number is thicker, so 14 gauge is heavier than 16, and 16 is heavier than 18. Grade is the alloy: type 304 is an austenitic stainless with about 18% chromium and 8% nickel, which gives it better corrosion resistance and makes it essentially non-magnetic; type 430 is a ferritic stainless with roughly 16–18% chromium and little or no nickel, which makes it magnetic, lower in cost and more prone to rust spotting around salt, acids and harsh sanitizers. A common value-for-money choice is a 304 top for wet or acidic prep and 430 for dry storage, stands and undershelves.
On this page
Stainless Steel Work Tables & Equipment: types and specs
Add what you need to your quote list. Your specialist confirms exact models, utilities and lead times before quoting. Everything ships direct to you from the manufacturer or its distribution warehouse.
Stainless steel work tables
Flat-top or backsplash tables with an undershelf or open base for prep. The top gauge and steel grade set durability and price.
- Depths 24, 30 and 36 in.; widths about 24–144 in.
- Tops in 14, 16 or 18 gauge, type 304 or 430
- Undershelf in stainless or galvanized steel
- Optional backsplash, casters or adjustable bullet feet
Equipment stands
Low, heavy-duty stands that put countertop griddles, charbroilers, fryers or mixers at working height.
- Common heights about 24 in. (low) and 30–36 in.
- Widths about 24–72 in., depths 24–30 in.
- Often 14 or 16 gauge tops with marine (raised) edges
- Check the stand load rating against equipment weight
Wall shelves
Wall-mounted stainless shelves for spices, smallwares and plating items above prep areas.
- Depths about 10–15 in.; lengths about 24–144 in.
- Solid or slotted shelf in 16 or 18 gauge
- Mount to studs or blocking with the supplied brackets
- Single or double tier
Overshelves
Single or double shelves mounted on top of a work table or equipment line for plates, tickets and holding.
- Table-mount or wall-mount styles
- Widths match common table lengths (about 36–120 in.)
- Often 10–18 in. deep
- Heated overshelves need an electrical connection
Pot racks
Wall, ceiling or table-mounted bars and grids with hooks for hanging cookware near the line or dish area.
- Lengths about 36–72 in.
- Wall, ceiling (needs structural support) or table-mount
- Hook count varies by length
- Stainless or aluminum
Stainless cabinets
Enclosed base or wall cabinets for secure, cleanable storage of dry goods, chemicals or small equipment.
- Hinged or sliding doors; some lockable
- Work-table cabinet bases about 24–30 in. deep
- Wall cabinets about 12–15 in. deep
- Look for removable doors and coved corners for cleaning
Bun pan racks
Mobile racks that hold full- or half-size sheet pans for baking, cooling, proofing and staging.
- Full size takes 18×26 in. sheet pans
- Full height commonly holds 20 pans at about 3 in. spacing
- End-load or side-load; welded or knock-down
- Aluminum is most common; stainless costs more
Utility carts
Two- or three-shelf carts for bussing, moving prep and transporting supplies.
- Stainless, aluminum or polymer construction
- Shelf sizes about 16×24 to 24×36 in.
- Load ratings vary by model and caster; check the spec sheet
- Look for non-marking casters, two with brakes
Dunnage racks
Low, open platforms that keep cases, sacks and boxes off the floor in walk-ins and dry storage.
- Heights usually about 8–12 in.
- Lengths about 24–60 in.
- Aluminum, stainless or polymer
- Solid or slotted tops; check rated capacity
Stainless Steel Work Tables & Equipment prices by type (2026)
| Type | Best for | Typical price (new) |
|---|---|---|
| Work table, 18 ga 430, 24×48 in. with undershelf | Light prep, dry storage, packing | $150–$450 |
| Work table, 16 ga 304, 30×72 in. with undershelf | Most daily prep stations | $350–$900 |
| Work table, 14 ga 304 (heavy duty) | Butchery, heavy mixers, slicers | $500–$1,500 |
| Work table with enclosed cabinet base | Bakeries, prep with secure storage | $700–$2,500 |
| Equipment stand (24–60 in. wide) | Countertop griddles, fryers, mixers | $200–$900 |
| Wall shelf (single, 12–14 in. deep) | Spices, small wares above prep | $50–$250 |
| Table-mounted overshelf (single or double) | Pass-throughs, make lines | $80–$400 |
| Pot rack (wall or ceiling, 36–72 in.) | Hanging pots, pans and utensils | $150–$600 |
| Bun pan rack, full size, 20 pans | Baking, cooling, staging | $150–$500 |
| Utility cart (2–3 shelf) | Bussing, moving prep and supplies | $100–$450 |
| Dunnage rack | Off-floor storage of cases and sacks | $60–$300 |
| Gauge | Approx. thickness | Typical use | Relative price |
|---|---|---|---|
| 14 gauge | ~0.078 in. (about 2.0 mm) | Heavy-duty prep, butchery, heavy countertop equipment, frequent pounding | Highest |
| 16 gauge | ~0.062 in. (about 1.6 mm) | General restaurant prep tables and equipment stands; the common all-round choice | Mid |
| 18 gauge | ~0.050 in. (about 1.3 mm) | Light prep, dry storage, packing and plating tables | Lowest |
How to size stainless steel work tables & equipment
- Plan at least one prep table per prep cook, plus dedicated tables for raw protein and ready-to-eat items where space allows.
- 30 in. deep tables are the most common; 24 in. fits tight aisles and 36 in. suits bakeries and large-batch prep.
- Standard work-table height is about 34–36 in.; adjustable bullet feet allow about 1 in. of leveling.
- For equipment stands, add the equipment weight plus pans and product, and choose a stand rated comfortably above that.
- Leave clear aisle space behind prep tables; confirm aisle widths with your designer and local code.
What drives the price
- Gauge (14 vs. 16 vs. 18)
- Steel grade (304 vs. 430)
- Size and backsplash or edge style
- Undershelf material (stainless vs. galvanized)
- Enclosed cabinet bases, drawers and doors
- Casters vs. fixed legs
- Freight: long tables ship by LTL and may need liftgate delivery
Before you buy: checklist
- 304 vs. 430: 304 (about 18% chromium, 8% nickel, austenitic, essentially non-magnetic) resists corrosion better and suits wet, salty or acidic prep; 430 (ferritic, roughly 16–18% chromium, little or no nickel, magnetic) costs less and works for dry use. A magnet test is a quick way to tell them apart.
- Match gauge to use: 14 gauge for heavy equipment and pounding, 16 for general prep, 18 for light duty.
- Look for NSF/ANSI 2 certification on food-contact tables and racks; many health departments look for it.
- Confirm whether the unit ships assembled or knocked down, and what tools are needed.
- Measure doorways and hallways for long tables and welded racks before ordering.
- Clean with non-abrasive pads and rinse off chlorine sanitizers; chlorides cause pitting, especially on 430.
Stainless Steel Work Tables & Equipment brands we quote
Eagle Group
U.S. manufacturer of stainless steel work tables, sinks, shelving, bun pan racks and other fabricated foodservice equipment.
Advance Tamco
Manufacturer of stainless steel work tables, equipment stands, sinks and shelving for commercial kitchens.
John Boos
Long-established U.S. maker of butcher block and cutting boards that also produces stainless steel work tables, sinks and shelving.
Metro (InterMetro)
Storage and transport brand best known for commercial wire shelving, polymer shelving, carts and food storage racks.
Don't see your brand? We quote most major foodservice manufacturers. Name the brand and model in your quote request.
Get stainless steel work tables & equipment quotes
Send us your specs, or just your menu and space, and we'll recommend the right models across brands with a written, freight-included quote.
Frequently asked questions
How much does a stainless steel work table cost?
A new stainless work table typically costs $150–$450 for a light 18-gauge 430 model, $350–$900 for a 16-gauge 304 table around 30×72 in., and $500–$1,500 or more for heavy 14-gauge tables in 2026, before freight and tax.
What gauge stainless steel is best for a work table?
16 gauge is the best all-round choice for most restaurant prep tables. Choose 14 gauge for heavy equipment, butchery or pounding, and 18 gauge only for light prep, packing or dry storage.
What is the difference between 304 and 430 stainless steel?
Type 304 contains about 18% chromium and 8% nickel and resists corrosion better, while type 430 has little or no nickel, is magnetic and costs less. Use 304 where tables see water, salt, acids or frequent sanitizing, and 430 for dry storage and stands.
Is a lower gauge number thicker?
Yes. In sheet-metal gauges a lower number means thicker steel, so 14 gauge (about 0.078 in.) is thicker than 16 gauge (about 0.062 in.), which is thicker than 18 gauge (about 0.050 in.).
Do work tables need to be NSF certified?
Many health departments expect food-contact equipment to be certified to an applicable NSF/ANSI standard, and NSF/ANSI 2 covers food equipment such as work tables. Requirements vary, so confirm with your local health department before you buy.
What size work table do I need?
Most kitchens use 30 in. deep tables in 48–96 in. widths. Measure the space, leave room for aisles and equipment doors, and size equipment stands to the exact width of the equipment on top.
Related guides
Sources
Need help selecting equipment for your kitchen? Request a personalized equipment quote or call (732) 479-6550.