Ships direct from 135+ manufacturers and warehouses · No warehouse overhead · Nationwide delivery Mon–Fri 8am–6pm ET · (732) 479-6550

Free calculator

Stainless steel work table selector

By Equipment Specialist Team Last reviewed Prices: typical ranges for new equipment, U.S. 2026

For most restaurant prep, a 16-gauge type 304 stainless table with a backsplash against the wall and an undershelf is the practical default. Move to 14-gauge for mixers, slicers and equipment stands, and consider 430 steel and a galvanized undershelf only for dry, light-duty use. Build your spec below and add it to your quote.

Your spec:

    Assumptions: a common stock construction with reinforced top and 1-5/8 in. class legs; exact construction, load capacity and backsplash height vary by manufacturer. Use the published capacity for the model you buy.

    How the selector works

    The spec line uses the industry convention of depth x width, followed by gauge, steel type and options, so a supplier can match it across brands. Warnings come from general practice: thicker tops for heavy or vibrating equipment, 304 steel and stainless undershelves for wet work, and extra legs on long tables. These are planning guidelines, not load ratings.

    UseSuggested gaugeSuggested steelUndershelf
    General food prep16304Galvanized (dry) or stainless (wet)
    Equipment stand14 or 16304Stainless
    Heavy mixer / slicer / butchering14304Stainless
    Dry storage / packing18 or 16430 or 304Galvanized
    Starting points only. Follow the equipment manufacturer's installation requirements.

    Turn the number into a quote

    Send us your result and we'll recommend specific models across brands, with freight-included factory-direct pricing.

    Get a Free Quote Call (732) 479-6550

    Frequently asked questions

    What gauge stainless work table do I need?

    16-gauge is the usual choice for general restaurant prep. Use 14-gauge for countertop mixers, slicers, butchering and equipment stands, and keep 18-gauge for light prep, packing and dry storage.

    Should I get 304 or 430 stainless?

    Type 304 resists corrosion better and is the safer choice for wet, salty or acidic work and anything near sinks. Type 430 costs less and works well for dry, light-duty tables.

    Is a galvanized undershelf OK?

    In dry areas, yes, and it keeps cost down. In wet areas or where harsh chemicals are used, a stainless undershelf lasts longer.

    Do I need a backsplash?

    Choose a backsplash for tables against a wall so food and liquid do not go down behind them. Skip it for island tables worked from both sides.

    Related

    Call a Specialist Get a Free Quote